Lynx-studio Hilo Version 5 Firmware Manual de usuario

Mastering Analog to Digital / Digital to Analog Converter User Manual Addendum November 2012 Version 5 Firmware and Feature Update

1.4.2 Analog VU Reference Now you can calibrate the Analog meters to set the 0 VU level. Using the fader on-screen or the Rotary Knob, the 0 VU ma

6. The Hilo LCD screen will display a warning screen that reads “Do not turn off the computer or the Hilo during the firmware updater process”. The

11. After programming, the computer may need to reload the driver. If you are prompted to do so, perform an automatic driver installation when pro

www.lynxstudio.com [email protected] Updated: December 1, 2012 Copyright © 2012, Lynx Studio Technology Inc.

1 Hilo Firmware 5 Features 1.1 Meters The “All I/O” Meter Screen now shows the active USB channels. Hilo can be toggled between USB 8-channel mode

1.2.1 Sync Source When the LT-USB is NOT connected to the computer, the Sync Source may be changed to one of the following four choices: • Internal

1.2.2.2 Stereo / Mono Options for Input Channels In the Output Mix Routing Page. The default state for each input source is stereo, with two channe

1.2.2.3 Active Channels Shown on Output Mix Routing Page Improvements have been made that allow this page to accurately show the active inputs and o

1.3 Tools Menu 1.3.1 Save & Recall Scene Buttons Hilo scenes store routing, clocking settings, level controls, sample rate conversion settin

Input the Scene name using your fingers (or some pointed, non-abrasive pointer such as pencil eraser, pen end or even a chop stick). To clear the ent

Using the DSD application of your choice, connect your computer using the USB or Digital Input (AES IN; S/PDIF COAX IN or S/PDIF OPT IN). Before playi

Using the menu button on the Output side (here selected as Line Out), choose the output to which you want to send the test tone. Use the On/Off butt